50-120 kg/h pellet machine specifications:
| MODEL | CAPACITY(kg/h) | POWER | WEIGHT(kg)(nw/gw) | PACKING SIZE (mm) |
|---|---|---|---|---|
|
ZLSP-D 150A
|
50-100 | 8HP | 180/220 | 100x500x750 |
| ZLSP-D 150B | 50-100 | 5.5kW | 95/110 | 800x450x700 |
| ZLSP-D 150P | 50-100 | ≥8 HP | 90-110 | 900x540x1020 |
| ZLSP-D 150C | 60-110 | 5.5kW | 105/125 | 1000x480x780 |
| ZLSP-D 200A | 80-120 | 15 HP | 210/240 | 1460x750x900 |
| ZLSP-D 200B | 80-120 | 7.5 kW | 200/230 | 1050x480x930 |
| ZLSP-D 200C | 80-120 | 7.5 kW | 210/230 | 1050x550x830 |
| ZLSP-D 200P | 80-120 | ≥15 HP | 130/150 | 1000x540x1020 |
| ZLSP-R 200A | 80-120 | 15HP | 320/350 | 1460x950x1100 |
| ZLSP-R 200B | 80-120 | 7.5kW | 215/245 | 950x450x1050 |
| ZLSP-150Q | 90-120 | 7.5HP | 180/220 | 1000x500x750 |
Product Technology Advantages for 50-120 kg/h:
Improvement of dies for large pellet machine.
Over years of practicing and researching, our company has upgraded the heat treatment and processing of dies by adjusting technical parameters of dies. Now the newest model die is patented. It is guarantee not cracking in using, and it can be used to produce 800-1000 tons of pellets.
Improvement in pellet machine system.
According to the actual situation and the years of trial and error, we developed a patented "granulation room air circulation cooling device": apply air circulation holes in the granulation chamber, and suction opening outside the granulation chamber to use air cooling to low the room temperature down to granulation state, and also exclude the excess water vapor to prevent the high penetration of material moisture from causing deforming. Since 2008 this technology was put into mass production, there has been no cracking ring dies among those pellet mills or pellet mill plants we have sold.
Improvement in flat die pellet machine.
Reduction gear box is adopted to lower noise and prolong gear service life. Main parts are made by 40 Cr instead of 45# steel to be more wear-resisting. Roller, flat die, main shaft and roller shaft are processed by heat treatment (vacuum treatment) to have high hardness, wear-resistance and long service life. The pellet machines made by TICO are superior in all details.
Methods to select 50-120 kg/h pellet machine:
1. First, let’s see your raw material.
It is suggested to choose raw materials that have high heat value, for example, wood waste or sawdust. The wood pellets heat value is 4500-4800 kcal/kg (which means you burn 1kg of wood pellets, they will release 4500-4800 kcal energy if fully burnt), which is the highest among all biomass pellets. If you only have agricultural waste like straw, stalk, etc. you can also make pellets fuel, but the heat value will be lower, which is around 3500 kcal/kg.
For waste wood or sawdust, especially from soft wood, and also agricultural waste, we advise you buy D-type (die-rotating type) pellet machine. Such raw materials do not need too much processing pressure.
For hard wood species, we suggest you buy R-type (roller-rotating type) pellet machine which can produce higher pressure for processing the hard materials.
2. Let’s see what you want to make pellets for.
If you just make pellets for own use and do not need too much quantity, you can buy small pellet machines ZLSP series. Such pellet machines for sale have the capacity ranging from 50 kg/h to 120 kg/h for you to choose.
3. Compare the pellet machine qualities.
You may sometimes find many pellet machine suppliers online, but are not sure about their qualities. In fact, good pellet machine for sale has the following features:
Low machine faults during production, low energy consumption to produce the same quantity of biomass pellets. The pellet machine yield can reach the described capacity.
The compression ratio of pellet machine is most suitable for the specific raw material. Pellets have smooth surface, hardness is 1.1-1.3 ton/m3. Service life of pellet machine roller and die can be at least 800 h.
